L’INGÉNIERIE AU SERVICE DE LA PRODUCTION DE MEUBLESLa parole parle l'automatisation
FORTRANFabrication intelligente
Demander un devis

Automatisation de l’emballage

Machine de pliage automatique de boîte

Plier les ébauches de carton dans les boîtes en utilisant des sections pliantes fixes et mobiles. La séquence documentée comprend l'alimentation en ventouses et l'application d'adhésif.

La configuration et l'adéquation sont confirmées en fonction de vos exigences de production.

Fait pour le processus.

Caractéristiques techniques

Dimensions extérieures L*W*H(mm)9760*3550*2500
Autopoids de l'équipement(kg)About 3700
Alimentation électrique (kW)4.5kW (excluding gluing unit)
Charge de transport (kg)50
Hauteur de travail (mm)830±40 (undetermined. Depends on customer
boîte en carton gamme de traitement L(mm)400-2800
gamme de traitement de boîte en carton W(mm)320-900
Boîte en carton gamme de traitement H(mm)40-250
Efficacité de pliage(temps/min)5-7
Épaisseur du papier ondulé(mm)2.5-6
Ces spécifications publiées proviennent du catalogue de produits précédent. Confirmez la configuration et la révision en cours avec notre équipe avant de commander.
Afficher les tableaux de spécifications originaux
External dimensions L*W*H(mm)Self-weight of equipment(kg)Power supply(kW)Conveying load(kg)Working height(mm)
9760*3550*2500About 37004.5kW (excluding gluing unit)50830±40 (undetermined. Depends on customer
Carton processing range L(mm)Carton processing range W(mm)Carton processing range H(mm)Folding efficiency(times/min)Corrugated paper thickness(mm)
400-2800320-90040-2505-72.5-6
Serial numberNameDistinguishing featureModel
1Feeding table structureThe front material table is positioned at the flat board position, and the cylinder controls the lifting and positioning pin;the side servo motor accurately locates the preparation position of the paper skin feed;
2Rack base structureThe base of the mainframe rack, the servo linkage control servo motor drive mobile folding mechanism and the median drive mechanism are more accurate;
3Fixed side folding rack setFixed side folding frame, short edge cylinder folding, sheet metal auxiliary guide feed on both sides;rack welding gantry machining;high assembly accuracy, high operation accuracy, ensuring long service life and good stability of the equipment;
4Mobile side folding rack setMoving side folding frame, long-side cylinder folding, sheet metal auxiliary guide feeding on both sides;rack welding gantry machining;high assembly accuracy, high operation accuracy, ensuring long service life and good stability of the equipment;
5Five parts of the median drive mechanismThe servo control drive, the middle suction cup group drives the paper skin movement, the discharge motor drives the chain to drive the paper skin discharge;
6Mid-level suction cup groupThe belt of the servo motor drives the movement, the cylinder rises and lowers, and the suction cup vacuum absorbs the paper skin transmission, accurate operation and positioning;
7Folding expansion groupThe front and rear cylinder expansion cooperates with the guide rail to move back and forth, and the grouping cylinder swing arm mechanism realises the folding of different specifications and sizes;
8Press plate groupThe cylinder expands before and after, and acts on the bending of the ear to straighten the box into a right angle;
9Side-turning groupIt is mainly responsible for pressing the front and rear ends of the carton upwards, and the cylinder telescopic transmission drives the swing arm, so that the hot melt adhesive is firmly and stable;
10Swing arm ear seat groupThe cylinder drive expansion drives the swing arm. After the swing arm is positioned at a right angle, the lower pressure cylinder clamps the paper skin, with the side-turning group compression hot melt adhesive paste to make it firm and stable;
11Mid-level auxiliary edge pressing groupThe long swing arm cooperates with the guide rail to achieve a fully automatic middle position in the middle of the carton;the front block material assists the lower suction cup group to absorb the paper skin;the back end is divided into two groups of front and rear cylinders to control the front and back of the swing arm to assist the paper edge of the paper;to prevent the paper skin from being too wide and causing the problem of inaccurate moulding.
12Glue machine systemIn the glue machine system, we use a complete set of pure imported accessories of Le Baide, which can realise continuous glue spraying, complete functions, simple setting and convenient operation;

Les dimensions spécifiques au projet et les configurations optionnelles sont confirmées lors de l'examen technique.

Détails du catalogue

Lire la description d'origine de l'équipement

Replie les ébauches de carton dans des boîtes en utilisant des sections pliantes fixes et mobiles. La séquence documentée comprend l'alimentation en ventouse et l'application d'adhésif.

Les informations originales du produit migrent depuis le catalogue précédent de FORTRAN. Les spécifications et les options nécessitent une confirmation de configuration courante.

Votre production,
votre configuration.

Pour le mobilier et le traitement des panneaux. Partagez vos dimensions de panneaux, matériaux, interfaces de machines et la disposition disponible pour examiner la configuration la plus appropriée.

Explorer des solutions intégrées

Voir les détails.

2026 brochure produit principal

Contactez-nous pour des vidéos de travail et de la documentation spécifique au produit.

Quelques réponses utiles.

Cet équipement peut-il fonctionner avec mes machines existantes ?

Nous passons en revue vos interfaces de machine, la gamme de panneaux et la mise en page avant de recommander une intégration.

Quelles sont les informations nécessaires pour une citation?

Dites-nous vos dimensions de panneau, le processus, la configuration souhaitée et l'espace disponible au sol. Un dessin de plan nous aide à examiner l'application.

Les options et les dimensions sont-elles personnalisables?

Les options disponibles varient selon l'équipement. Notre équipe confirmera ce qui convient à votre projet et fournira les spécifications correspondantes.

Gardez le processus connecté.

Laissez-nous construire votre prochaine connexion

Mieux vaut couler.
Ça commence par une conversation.

Discutez de votre projet