KỸ THUẬT CHO DÒNG SẢN XUẤT NỘI THẤTHãy nói về sự tự động hóa
FORTRANSản xuất thông minh
Yêu cầu báo giá

Tự động hóa đóng gói

Máy gấp hộp tự động

Gấp ống bìa các tông thành hộp, dùng các phần cố định và xếp lại. Dãy kết nối kết nối kết nối bao gồm cả việc cho ăn và dán.

Cấu hình và khả năng thích nghi được xác nhận chống lại yêu cầu sản xuất của bạn.

Được tạo ra cho quá trình này.

Đặc điểm kỹ thuật

Kích thước ngoài L*W*H (mm)9760*3550*2500
Thiết bị tự cân nặngAbout 3700
Nguồn điện (kW)4.5kW (excluding gluing unit)
Tải liên kết (kg)50
Chiều cao (mm)830±40 (undetermined. Depends on customer
Phạm vi xử lý hộp bìa cứng L(mm)400-2800
Phạm vi xử lý hộp bìa cứng320-900
Phạm vi xử lý hộp bìa cứng H(mm)40-250
Đang gấp lại hiệu suất (thời gian/min)5-7
Độ dày giấy đã nhuộm2.5-6
Những chi tiết được công bố này nằm trong danh mục sản phẩm trước. Hãy xác nhận cấu hình và sửa đổi hiện thời với nhóm của chúng tôi trước khi đặt hàng.
Xem bảng đặc tả gốc
External dimensions L*W*H(mm)Self-weight of equipment(kg)Power supply(kW)Conveying load(kg)Working height(mm)
9760*3550*2500About 37004.5kW (excluding gluing unit)50830±40 (undetermined. Depends on customer
Carton processing range L(mm)Carton processing range W(mm)Carton processing range H(mm)Folding efficiency(times/min)Corrugated paper thickness(mm)
400-2800320-90040-2505-72.5-6
Serial numberNameDistinguishing featureModel
1Feeding table structureThe front material table is positioned at the flat board position, and the cylinder controls the lifting and positioning pin;the side servo motor accurately locates the preparation position of the paper skin feed;
2Rack base structureThe base of the mainframe rack, the servo linkage control servo motor drive mobile folding mechanism and the median drive mechanism are more accurate;
3Fixed side folding rack setFixed side folding frame, short edge cylinder folding, sheet metal auxiliary guide feed on both sides;rack welding gantry machining;high assembly accuracy, high operation accuracy, ensuring long service life and good stability of the equipment;
4Mobile side folding rack setMoving side folding frame, long-side cylinder folding, sheet metal auxiliary guide feeding on both sides;rack welding gantry machining;high assembly accuracy, high operation accuracy, ensuring long service life and good stability of the equipment;
5Five parts of the median drive mechanismThe servo control drive, the middle suction cup group drives the paper skin movement, the discharge motor drives the chain to drive the paper skin discharge;
6Mid-level suction cup groupThe belt of the servo motor drives the movement, the cylinder rises and lowers, and the suction cup vacuum absorbs the paper skin transmission, accurate operation and positioning;
7Folding expansion groupThe front and rear cylinder expansion cooperates with the guide rail to move back and forth, and the grouping cylinder swing arm mechanism realises the folding of different specifications and sizes;
8Press plate groupThe cylinder expands before and after, and acts on the bending of the ear to straighten the box into a right angle;
9Side-turning groupIt is mainly responsible for pressing the front and rear ends of the carton upwards, and the cylinder telescopic transmission drives the swing arm, so that the hot melt adhesive is firmly and stable;
10Swing arm ear seat groupThe cylinder drive expansion drives the swing arm. After the swing arm is positioned at a right angle, the lower pressure cylinder clamps the paper skin, with the side-turning group compression hot melt adhesive paste to make it firm and stable;
11Mid-level auxiliary edge pressing groupThe long swing arm cooperates with the guide rail to achieve a fully automatic middle position in the middle of the carton;the front block material assists the lower suction cup group to absorb the paper skin;the back end is divided into two groups of front and rear cylinders to control the front and back of the swing arm to assist the paper edge of the paper;to prevent the paper skin from being too wide and causing the problem of inaccurate moulding.
12Glue machine systemIn the glue machine system, we use a complete set of pure imported accessories of Le Baide, which can realise continuous glue spraying, complete functions, simple setting and convenient operation;

Kích thước đặc trưng của dự án và cấu hình tùy chọn được xác nhận trong quá trình xem xét kỹ thuật.

Chi tiết ghi chép

Đọc mô tả thiết bị ban đầu

Gấp ống bìa các tông thành ô bằng các phần cố định và xếp lại. Chuỗi tài liệu có chứa một ứng dụng hút và dán.

Thông tin về sản phẩm gốc đã di chuyển từ danh mục trước. Cần xác nhận cấu hình hiện thời.

Sản phẩm của anh,
cấu hình của bạn.

Cho đồ nội thất và các dòng xử lý bảng điều khiển xử lý. Chia sẻ kích thước, vật liệu, giao diện máy và bố trí sẵn sàng để xem lại cấu hình thích hợp nhất.

Khám phá các giải pháp hợp nhất

Xem chi tiết đi.

Sổ tay chính năm 2026

Liên lạc với chúng tôi để làm việc video và các tài liệu cụ thể sản phẩm.

Một vài câu trả lời hữu ích.

Thiết bị này có hoạt động với máy móc hiện tại của tôi không?

Chúng tôi xem xét giao diện máy móc, phạm vi và cách bố trí trước khi đề nghị sự tích hợp.

Cần có thông tin gì để trích dẫn?

Cho chúng tôi biết kích thước bảng điều khiển, quá trình, cấu hình và không gian sàn muốn. Một bản vẽ bố trí giúp chúng tôi xem xét ứng dụng.

Các lựa chọn và chiều không gian có thể tùy chỉnh không?

Tùy chọn sẵn sàng thay đổi tùy theo thiết bị. Nhóm chúng tôi sẽ xác nhận những gì thích hợp cho dự án của bạn và cung cấp những thông tin cụ thể tương ứng.

Giữ cho quá trình được kết nối.

Hãy xây dựng mối quan hệ tiếp theo của bạn

Tốt hơn là nên đi.
Bắt đầu bằng một cuộc trò chuyện.

Bàn luận về dự án của bạn